Syringe Heater Kit,HEATER-KIT-1LG
價 格：詢價
產 地：美國更新時間：2021-02-23 11:49
品 牌：syringepump型 號：HEATER-KIT-1LG
狀 態：正常點擊量：2435
400-006-7520
聯系我時，請說明是在上海非利加實業有限公司上看到的，謝謝！
聯 系 人：
上海非利加實業有限公司
電 話：
400-006-7520
傳 真：
400-006-7520
配送方式：
上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝！
Syringe Heater Kit
Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm
Model: HEATER-KIT-1LG
Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.
Syringe Heater Kit,HEATER-KIT-1LG
Description:
Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.
Specification Notes:
Available in 2 versions:
1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)
5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)
Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.
Multiple syringe heater pads can be attached to the control unit, under restricted conditions.
Set point and other parameters retained in memory
Digitally sets the heater set point
Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.
Dual temperature sensors in primary heating pad.
Alarm modes with multiple layers of protection to prevent temperature overrun.
Additonal heat protection for the pump may be needed when heating syringes above 100°C.
If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.
產品參數
Syringe Heater Kit
Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm
Model: HEATER-KIT-1LG
Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.
Description:
Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.
產品介紹
Syringe Heater Kit
Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm
Model: HEATER-KIT-1LG
Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.
Description:
Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.
Specification Notes:
Available in 2 versions:
Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.
Multiple syringe heater pads can be attached to the control unit, under restricted conditions.
Set point and other parameters retained in memory
Digitally sets the heater set point
Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.
Dual temperature sensors in primary heating pad.
Alarm modes with multiple layers of protection to prevent temperature overrun.
Additonal heat protection for the pump may be needed when heating syringes above 100°C.
If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.
Syringe Heater Kit,HEATER-KIT-1LG
滬公網安備31011502016460號
